Client photos of Ranger Green equipment

From This post

And This other post

My client sent me some higher quality photos of the pouches,as well as a couple on his personal “grab and go” armor rig

Views of pouches from front and inside

View of back and side of 1×2 kangaroo

 

View of them on carrier, on each side of the triple magazine pouch

 

Woodland camo body armor set, custom made

Made this to fit very old size 2XL Safariland S3A Level 3A soft armor and 10×12 Level 3 “ICW(In Conjunction With )” ceramic plates, for my personal use.

1000D Cordura in Woodland Camo

Medium weight polyester mesh

Camo 483 webbing

OD herringbone tape

Ranger Green velcro

Duraflex Mojave buckles

Showing webbing layout and side buckle set up

Laid totally flat on floor, showing the general insert layout and the inner fabric which is mesh and Cordura folded up

With USGI MOLLE II pouches;

2x Canteen covers, 2x Pistol pouches, 3x M16 double pouches, 1x SAW 100rd/Utility holding First aid kit

Yours truly modeling the carrier. It is heavy with everything loaded, but it is quite comfortable

Olive Green plate carrier

Made a modular plate carrier in 1000D Olive Green; the green is a very close match to Tactical Tailor’s OD green.

Specs;

1000D Cordura Nylon, Olive Drab

Mil spec webbing, 1″, a shade of green

mil spec webbing, 2 1/4″, USGI green with red line

fits 10″x13″ Medium SAPI Plates

Approx 28″ front width, 10″ rear width, 18 slots, and 6 rows maximum height on front, 6 columns and 6 rows on rear

compatible with ALICE and MOLLE gear

Sized to fit up to 3xl men, smallest it can go down is around 38 inches circumference

20170807_172019

Front of plate carrier with wings

20170807_172033

Back plate bag

20170807_172118

Inside of back plate bag

20170807_172139

Inside of front plate rig

20170809_133211

Tactical Tailor OD X harness against plate carrier.

20170807_172147

Plate pocket flap detail; reinforced with 1.75″ webbing and using Line 24 snaps, this is the front plate bag flap

20170807_172201

Back plate bag flap, I changed positioning of the reinforcement to behind the fabric on the male ends.

20170807_172223

Shoulder strap padding; not totally happy with how they came out

20170809_132941

Showing plate thickness and plate bag side stitching, front plate bag

20170809_132953

rear plate bag with plate in, again showing side seam/stitching details

20170809_140104

Set up for AR15 with Tactical Tailor pouches, USGI holster,  magazine pouches and compass pocket, and London BRidge Trading triple pistol ALICE pouch

20170809_140745

Modeled by my lovely wife-to-be, front

20170809_140800

Side showing Tactical Tailor medic pouch

20170809_140750

Back, showing at the smallest, being oversize for her.

20170810_083032

Last, all ALICE pouches, and strobe pocket on left shoulder pad.

 

Gear for sale; rigs and pouches

I have some self-made gear for sale; the 995 Plate Carrier rig, and a new leg pouch for 2x Redball magazines, and a black split 6-mag AR chest rig with zippered pockets;

I do take Paypal; email me for information!

20170716_194908

Redball plate carrier; 4x 20rd mags shown; fits plates up to 9x12x1. Asking $75 without magazines.

20170526_170231

AR Chest rig; 6 AR mags, zippered compartments, 1000D Cordura. Asking $90, mags not included

20170526_170243

top view of rig

20170526_170257

Back of rig

20170526_170449

bottom of rig

 

20170526_172234

shown with self-made DCU rig and Tactical Tailor OD MAV

20170722_164218

Leg pouch for 2x Redball magazines plus single MOLLE column for pistol pouch or multitool pouch

20170722_164228

MALICE style backing for MOLLE belts, and tunnel for standard belts up to 3″ wide.

20170722_164239

belt pass-through tunnel

20170722_164346

With two Redball mags and a Riggers belt threaded through

20170722_164426

With MOLLE M9 pistol pouch attached.

I am asking $25 for this leg rig pouch; without belt and without MOLLE pouch. also does not come with the magazines.

Email me for more details, I am willing to custom make gear for a price! Chest rigs anywhere from $75 to $125 depending on features, pouches from $20 to 40, depending on size, capacity, and magazine type! I do not make SKS 10rd clip pouches anymore, as the surplus Continue reading

Redball Magazine plate carrier and pouches

I Modified my black horizontal Redball 20rd magazine chest rig into a basic plate carrier complete with back plate bag; and then I decided to build a couple pouches, first pouch was an attempt at doing a vertical, side by side pouch with bungee cord retention, hated it.. so made a 2nd pouch that is much more conventional; holds 4 20rd magazines in a boxy pouch that is kinked on the sides, and has a center divider, and two 3/4 coverage flaps over each pair of magazine.

17500400_10212676767098725_40685970_o

Front of 4-mag plate carrier

17522021_10212660375568947_1492802446_o

Back of the front carrier

17571301_10212676767018723_1584227163_o

inside of both carriers

17571382_10212660375768952_147266955_o

Side view of front carrier

17571922_10212676767138726_1689016066_o

View of outside of both carriers; the rear carrier has MOLLE strips for attachment of hydration pouch or small gear; or even butt pack on bottom row.

The plate carrier will fit up to 9×12 plates on both front and back. It is basically a simple armor carrier with magazine pockets sewn to the front , and utility/first aid pockets sewn on the sides.

17622557_10212695341283068_589020450_o

My first attempt at a MOLLE 995 20rd pouch for the 20 rd Redball magazines; the idea was to have elastic retention and not a lot of fabric, but it is a failure here, due to the extreme splay and sticking far out away from the platform it attaches to.

17692844_10212695341683078_1823718218_o

Side view of pouch showing the kink and how far away it sticks out

17623062_10212695525247667_417350286_o

good view of how far it sticks out from a MOLLE belt; due to being bottom heavy and not having a lot of retention up top other than the elastic cordage

17571744_10212695525287668_871548173_o

Mounted to the MOLLE belt I have, it is not really good here.

17692700_10212695341563075_1533369089_o

Back view of the pouch showing Tactical Tailor styled MOLLE webbing for use with TT  Short MALICE clips.

17670768_10212711122917599_1884595210_o

pattern blank cut up, then hemmed with edge tape for 2nd MOLLE pouch in Coyote Brown

17670607_10212711842335584_829307077_o

All done except some details; 1″ ITW buckles in Tan-499 color, khaki webbing straps

17693173_10212712153463362_800367116_o

Mounted to the MOLLE belt

17622289_10212712154623391_1155258031_o

Finished 3/4 coverage flaps on the top using 1.5″ webbing.

17758965_10212712154463387_751759966_o

Another view of the top half; mounted by the same MALICE clips and same style webbing on the back of the pouch, as the pouch retains the magazines better; the whole thing is far stabler and easier to use.

17758970_10212712153343359_55155911_o

Side view showing the kink in the side panels to accommodate the Redball magazine shape

 

 

 

Coyote tan 8-cell 995 rig and black Plate carrier rig

Built a Coyote tan 8-cell vertical mag rig for 4 Redball 20rd mags, and 4 10rd Factory 995 mags, and then built a 5 20rd, 5-10 10rd vertical Plate Carrier clip-on rig for two customers!dscf0881

On olive green fabric, showing the tan X harness, tan webbing and mags loaded.

dscf0882

Compared to fishing belt kit with Coyote pouches

dscf0884

Against 330D Multicam fabric

I also modified a customer’s black slick plate carrier to accept the black 8 cell vertical rig, and built a new 10 cell direct-attach rig. I added 4x Fastex buckles to the Plate Carrier, this was the least invasive method for the user, did not need to rip seams to attach buckles

20160714_162007

Front of Plate Carrier showing the two upper buckles

 

20160714_161938

Back of plate carrier, showing the top 2 45 degrees buckles for the diagonal webbing

20160714_162830

Loaded up and attached to rig on mannequin. Front view.

20160714_162850

Back 3/4 view, the user utilizes the standard back strap of the chest rig, and the diagonal webbing from the black 8 cell rig goes up to the two 45 degree buckles. THe 8 cell rig is capable of being used on its own with its H harness, and the carrier can keep the buckles fastened/unused.

I made a 5 cell plate carrier rig next, with no snaps, but velcro attachment, back strap attachment, and a simplified upper strap attachment, for direct attachment to the black plate carrier. I overestimated the size of the dividers needed, and now the 5 front cells can have up to 2 9mm Hi Point mags, OR 1 double stack pistol mag in each cell, and the back 5 cells are generously sized for the Redball magazines. With this cleaner panel layout and the size, it does not extend past the edges of the plate carrier.

20160904_173621

Clipped directly and attached to the plate carrier

20160904_173639

Back view of rig, showing the velcro strip for attaching to plate carrier and reversed buckles up top, adjusts from the inside, so as to hide the straps for a clean appearance

20160904_173656

Front 4 cell panel showing velcro flaps and velcro attachment. It looks like I was off on the bottom stitching, but that is a result of not loading the cells with weight, it is even when loaded.

The material used is 500D Cordura in both black and coyote tan.